2019 Nissan Rogue: Choosing The Right Oil Type & Capacity

Nov 8, 2025 by Admin 58 views

Hey guys! If you're a proud owner of a 2019 Nissan Rogue, you're probably wondering about the right oil type and capacity to keep your ride running smoothly. Don't worry; we've got you covered! Choosing the correct oil is crucial for your engine's health and performance. In this comprehensive guide, we'll dive into everything you need to know about selecting the best oil for your 2019 Rogue and ensuring it's filled to the proper capacity. Let's get started and keep that engine purring!

Understanding the Importance of Oil for Your 2019 Nissan Rogue

Okay, so why is oil so important anyway? Well, for starters, your engine's oil is like the lifeblood of your 2019 Nissan Rogue. It's responsible for lubricating all those moving parts, reducing friction, and preventing wear and tear. Without clean, properly specified oil, your engine could overheat, seize up, and leave you stranded. Think of it as the ultimate protector for your engine's longevity and performance.

Here's a breakdown of what oil does for your engine:

Lubrication: The primary function of oil is to lubricate the engine's internal components. This reduces friction between moving parts, which can cause heat and wear. By creating a thin film between these parts, oil allows them to glide smoothly, minimizing damage and extending the engine's lifespan.
Cooling: As the engine runs, it generates a lot of heat. Oil helps to dissipate this heat by absorbing it and carrying it away from critical components. This prevents overheating and ensures the engine operates at a safe temperature.
Cleaning: Oil also plays a crucial role in keeping the engine clean. It picks up dirt, debris, and combustion byproducts, preventing them from accumulating and causing sludge. The oil then carries these contaminants to the oil filter, where they are trapped and removed from the system.
Sealing: Oil helps to seal the gaps between the piston rings and cylinder walls, preventing combustion gases from leaking into the crankcase. This ensures optimal compression and power output.
Protection: By coating engine components with a protective film, oil helps to prevent corrosion and oxidation. This is especially important for engines that operate in harsh environments or are subjected to frequent stop-and-go driving.

Using the correct type and amount of oil ensures that these functions are performed optimally, keeping your 2019 Nissan Rogue running smoothly and reliably for years to come. So, let's get into the specifics of what kind of oil your Rogue needs!

Recommended Oil Type for the 2019 Nissan Rogue

Now, let's get down to the specifics. For the 2019 Nissan Rogue, Nissan recommends using SAE 0W-20 full synthetic oil. This is the golden ticket for keeping your engine happy and healthy. Why 0W-20? The "0W" indicates the oil's viscosity at low temperatures, meaning it flows well even in cold weather, ensuring your engine starts smoothly. The "20" represents the oil's viscosity at higher temperatures, providing adequate lubrication when your engine is working hard. Full synthetic oil offers superior protection compared to conventional oil, thanks to its enhanced additives and resistance to breakdown.

Why Full Synthetic?

Full synthetic oils are engineered to provide better performance and protection compared to conventional oils. They are formulated with highly refined base oils and advanced additives that offer several benefits:

Improved Thermal Stability: Full synthetic oils can withstand higher temperatures without breaking down, which is crucial for maintaining proper lubrication and preventing sludge formation.
Enhanced Oxidation Resistance: These oils are more resistant to oxidation, which means they can maintain their viscosity and performance characteristics for longer periods.
Better Low-Temperature Performance: Full synthetic oils flow more easily at low temperatures, ensuring that critical engine components are lubricated quickly during cold starts.
Superior Wear Protection: The advanced additives in full synthetic oils provide enhanced protection against wear and tear, extending the life of your engine.

Can You Use Other Oil Types?

While 0W-20 full synthetic oil is the recommended choice, using other oil types is generally not advisable unless in emergency situations. If you absolutely must use a different oil, make sure it meets the minimum requirements specified by Nissan. In a pinch, you might consider a 5W-30 synthetic blend, but always switch back to 0W-20 full synthetic as soon as possible. Always consult your owner's manual for the most accurate and up-to-date information.

Oil Capacity for the 2019 Nissan Rogue

Okay, so you know what type of oil to use, but how much do you need? The 2019 Nissan Rogue typically requires 4.8 quarts (4.5 liters) of oil when you're changing the oil and filter. However, always double-check your owner's manual to confirm the exact capacity for your specific engine, as it can vary slightly. Overfilling or underfilling can both cause problems, so accuracy is key!

Why is the Correct Oil Capacity Important?

Using the right amount of oil is crucial for maintaining optimal engine performance and preventing damage. Here’s why:

Proper Lubrication: The correct oil level ensures that all engine components receive adequate lubrication. Underfilling can lead to insufficient lubrication, causing increased friction, wear, and potential engine damage.
Optimal Cooling: The right amount of oil helps to dissipate heat effectively. Overfilling can cause the oil to become aerated, reducing its cooling capacity and potentially leading to overheating.
Maintaining Oil Pressure: Proper oil level is essential for maintaining the correct oil pressure. Low oil levels can result in reduced oil pressure, which can starve critical engine components of lubrication.
Preventing Oil Leaks: Overfilling can cause excessive pressure within the engine, leading to oil leaks through seals and gaskets. This can result in oil loss and potential environmental damage.

How to Check Your Oil Level:

Park on a Level Surface: Ensure your Rogue is parked on a flat surface to get an accurate reading.
Wait for the Engine to Cool: Allow the engine to cool down for at least 10 minutes before checking the oil level.
Locate the Dipstick: The oil dipstick is usually yellow or orange and is located near the engine.
Remove and Clean the Dipstick: Pull out the dipstick and wipe it clean with a lint-free cloth.
Reinsert the Dipstick: Push the dipstick back into its tube until it is fully seated.
Remove and Read the Dipstick: Pull the dipstick out again and check the oil level. The oil should be between the minimum and maximum marks on the dipstick.
Add Oil if Necessary: If the oil level is below the minimum mark, add oil in small increments, checking the level after each addition until it reaches the correct mark.

Step-by-Step Guide to Changing Your 2019 Nissan Rogue's Oil

Alright, feeling adventurous? Changing your own oil can save you some cash and give you a sense of accomplishment. Here's a simplified step-by-step guide to help you through the process. Remember to always prioritize safety and consult your owner's manual for specific instructions.

Tools and Materials You'll Need:

New 0W-20 full synthetic oil (4.8 quarts)
New oil filter
Wrench for the oil filter
Socket wrench and socket for the drain plug
Oil drain pan
Funnel
Gloves
Rags or paper towels
Jack and jack stands (optional, but recommended for easier access)

Steps:

Warm Up the Engine: Run the engine for a few minutes to warm the oil, making it flow more easily. Turn off the engine.
Prepare the Vehicle: Jack up the car and secure it with jack stands. Alternatively, you can use ramps.
Locate the Oil Drain Plug: Find the oil drain plug underneath the engine. Place the oil drain pan underneath the plug.
Remove the Drain Plug: Use the socket wrench to loosen and remove the drain plug. Let the old oil drain completely into the pan. Be careful, as the oil may be hot.
Replace the Drain Plug: Once the oil has finished draining, clean the drain plug and install a new crush washer if necessary. Tighten the drain plug to the manufacturer's specified torque.
Remove the Old Oil Filter: Locate the oil filter and use the oil filter wrench to loosen and remove it. Be prepared for some oil to spill.
Install the New Oil Filter: Lightly lubricate the rubber gasket on the new oil filter with fresh oil. Screw the new filter into place by hand until the gasket makes contact, then tighten it another ¾ turn.
Lower the Vehicle: Carefully lower the vehicle back to the ground.
Add New Oil: Open the oil fill cap on top of the engine and use the funnel to pour in 4.8 quarts of new 0W-20 full synthetic oil.
Check the Oil Level: Use the dipstick to check the oil level. Add more oil if necessary to reach the correct level.
Start the Engine: Start the engine and let it run for a few minutes. Check for leaks around the drain plug and oil filter.
Turn Off the Engine and Recheck the Oil Level: Turn off the engine and let it sit for a few minutes. Recheck the oil level and add more oil if needed.
Dispose of the Old Oil Properly: Take the used oil and filter to a recycling center or auto parts store for proper disposal.

Important Tips:

Always consult your vehicle's owner's manual for specific instructions and torque specifications.
Use the correct tools and materials to avoid damaging your vehicle.
Be careful when working with hot oil and engine components.
Properly dispose of used oil and filters to protect the environment.

Benefits of Using the Recommended Oil

Sticking with the recommended 0W-20 full synthetic oil isn't just a suggestion; it's an investment in your 2019 Nissan Rogue's longevity. You'll experience better fuel efficiency, improved engine performance, and reduced wear and tear. Plus, you'll sleep better knowing you're giving your engine the best possible care.

Here’s a closer look at the benefits:

Extended Engine Life: Full synthetic oils provide superior protection against wear and tear, extending the life of your engine.
Improved Fuel Efficiency: The low viscosity of 0W-20 oil reduces friction, which can improve fuel economy.
Enhanced Performance: Full synthetic oils maintain their viscosity and performance characteristics under extreme conditions, ensuring optimal engine performance.
Better Cold Weather Starts: The excellent low-temperature flow properties of 0W-20 oil ensure quick and easy starts, even in cold weather.
Reduced Sludge and Deposits: Full synthetic oils resist the formation of sludge and deposits, keeping your engine clean and running smoothly.

Conclusion: Keep Your Rogue Running Smoothly

So, there you have it! Keeping your 2019 Nissan Rogue running smoothly is all about using the right oil – 0W-20 full synthetic – and ensuring you have the correct amount – 4.8 quarts. By following these guidelines, you'll not only extend the life of your engine but also enjoy better performance and fuel efficiency. Happy driving, and remember to always consult your owner's manual for the most accurate information! Safe travels, guys!